THE HIGHEST POWERED- EXTREME WIDE ANGLE WITH DUAL 'CENTER CORE' WITH 14 'EYES'
DB120 LENS
To be placed over a 1" pre drilled PIR SENSOR hole. This is a thin designed piece of material that is easily sealed to the case by means of Goop, Silicone, Our SQUARE FRESNEL LENS HOLDERS ABOVE or the; 2" IND sticky tape above, is the preferred mounting method. slight bevel.
Can also drill out (3) small holes for a T-P style detection: Center, Bottom left & Bottom right
When used on an SS card, you can expect 40' deep x 25' wide utilizing the Very High setting and 7/8" standoffs, when setting the Sniper card to medium sensativity you can expect approx 20' wide x 25' deep. These numbers can be decreased by using longer standoffs such as 1" to 1-1/4"
We feel this is the BEST W/A lens out there
- Maxamize & Increase Angle to 120 degree, Distance with dual center core focal windows
- Measures: 1-3/4" x 2-1/4"
Price: $2.99 IN STOCK
ITEM # DB120
PLEASE READ THE FRESNEL DEFINITIONS:
The XLP uses a .65" fresnel lens on all of it's installations. Now if you want to add the Wide Angle to your TC case, all you have to do is drill out two 9/64" or smaller additional holes, a 1/2" to the left and a 1/2" to the right side of the center 11/64" hole... Then cut the center of the milky colored .65" fresnel lens 3/4 rings out and place it over the center hole. Then take the smooth edging of the milky colored fresnel lens and cut it down into 2 small squares large enough to cover your outside Wide Angle holes...
The Wide Angle Fresnel lens, can be explained this way: The SB110 is the same as the HPWA when reducing the PIR distance between the PIR FRESNEL LENS in comparison to the standard .65" distance... (This lens is NOT used on an XLP TC)
The DB120 Lens is the most powerful lens out there, it has a split beam dead center, and optimal performance is obtained by reducing the PIR distance between the PIR sensor and the PIR FRESNEL LENS. (This lens is NOT used on an XLP TC)
IN STOCK
